Five years goes fast in a body shop. One day the certificate on the wall is new, and the next your myASE account says it expires this year. The good news is that keeping an ASE collision certification is a lot less work than earning it. Here is how recertification works for the ASE B2 through ASE B6, in plain terms.
Who takes a recertification test
Recertification tests are for anyone who has passed that certification test before. It does not matter whether the certification is still current or expired years ago: once you have passed ASE B3, for example, you are eligible for ASE B3R from then on. If you have never passed a given test, you take the full certification test instead.
When to take it

Each certification is valid for five years. The expiration date is on your certificate and in myASE, and ASE emails reminders before it comes up.
Timing matters in one way. If you recertify early, the new five years start from the day you pass the recertification test, and whatever time was left on the old certification is gone. Recertifying in the last few months before the deadline keeps the most time. Waiting until after it expires costs nothing in eligibility, but you are not certified in that area until you pass.
How long the recertification tests are
| Recertification test | Questions | Time limit | Certification test it replaces |
|---|---|---|---|
| ASE B2R Painting and Refinishing | 28 | 45 minutes | 65 questions, 90 minutes |
| ASE B3R Non-Structural Analysis and Damage Repair | 28 | 45 minutes | 65 questions, 90 minutes |
| ASE B4R Structural Analysis and Damage Repair | 25 | 30 minutes | 60 questions, 75 minutes |
| ASE B5R Mechanical and Electrical Components | 25 | 30 minutes | 60 questions, 75 minutes |
| ASE B6R Damage Analysis and Estimating | 25 | 30 minutes | 60 questions, 75 minutes |
Two differences from the first test are worth knowing:
- Every question counts. Certification tests carry 10 unscored research questions; recertification tests carry none. With 25 or 28 questions, each one is a bigger share of your score.
- The clock is tighter per question than it looks. ASE B2R and B3R give about 96 seconds a question, and ASE B4R, B5R and B6R about 72. That is plenty if you know the material and tight if you stop to reread every stem.
The questions come from the same task list as the certification test, and it is the current task list, not the one you studied five years ago. Today's collision task lists include topics such as advanced driver assistance systems (ADAS) and high-voltage safety, so read the current list on our ASE task lists page before you sit the test.
Where you can take it

You have three choices for a collision recertification test:
- A Prometric test center, by appointment, the same way you took the first test.
- Prometric ProProctor, online from home or work, by appointment. Book at least four days ahead so there is time to install the software and run the system check.
- The ASE Flex Test, online with no appointment. You test on a desktop or laptop, with your phone or tablet set up beside it as a second camera.
The remote options need a private, closed room where nobody comes in, a clear desk and a government-issued photo ID. If you need a testing accommodation, contact ASE first, because most accommodations are only available at a test center. ASE's testing options page has the current rules for each.
The ASE Renewal App does not cover collision
ASE also runs a Renewal App that extends certifications by answering a question a month. It is only for the Automobile series (A1 to A9). There is no app route for ASE B2 to B6: a collision certification is renewed by passing its recertification test.
Keeping Master Collision status
ASE Master Collision Repair and Refinish Technician status rests on four certifications: ASE B2, B3, B4 and B5. Each one runs on its own five-year clock, and Master status lasts only while all four are current. If you passed them in different years, they will come due in different years, so put each expiration date in your calendar and recertify each area as it comes up. The ASE collision certification roadmap shows how Master fits together.
Practice the shorter test before you sit it

The fastest way to find out how much you remember is a timed run at the real length. Our simulator has a recertification mode for every collision test: 28 questions in 45 minutes for ASE B2 and ASE B3, and 25 questions in 30 minutes for ASE B4, ASE B5 and ASE B6, drawn across the same content areas as the real test. Your weakest areas show up after one run, so you study those instead of the whole book. Open the Test Simulator for your test, pick Recertification Exam, and start: ASE B2, ASE B3, ASE B4, ASE B5 or ASE B6.
ASE's own details, including current fees, are on its pages for the B2 to B5 tests and the B6 test.


Discussion
Join the discussion — sign in to comment.
Comments are reserved for registered students and technicians. Your name will be pulled from your profile automatically.
Log In Register